Three Phase Oil Immersed Distribution Transformer
https://www.tenrony.com/products/three-phase-oil-immersed-distribution-transformer/
#3 #phase #transformer #manufacturers
The S13 type is developed by our company based on the original distribution transformer. Through the research and application of new materials and new processes, as well as the combination of independent innovation and technology introduction, and through the optimized and innovative design of the core and coil structure, i... moreThree Phase Oil Immersed Distribution Transformer
https://www.tenrony.com/products/three-phase-oil-immersed-distribution-transformer/
#3 #phase #transformer #manufacturers
The S13 type is developed by our company based on the original distribution transformer. Through the research and application of new materials and new processes, as well as the combination of independent innovation and technology introduction, and through the optimized and innovative design of the core and coil structure, it aims to reduce no-load losses and noise. Self-developed products.
The average no-load loss has decreased by 37%. The noise level has decreased by an average of 20%compared with the current national standard JB/T10088-2004, and the product performance level has reached the advanced domestic level.
Features
Based on traditional structure and mature technology, our company has made many improvements, including.
Adopting a spiral coil with longitudinal oil passages for better internal heat dissipation.
Improving the effective support of the coil end face for stronger short-circuit current resistance.
Using a new lifting structure and body positioning structure to ensure greater reliability during long-distance transportation and operation.
The oil tank adopts a fully sealed structure, isolating the transformer from the atmosphere, preventing and slowing down oil degradation and insulation moisture, enhancing operational reliability, and requiring no maintenance during normal operation.
Benefits
We also have many unique and reliable structures to serve you.
By selecting transformers with higher performance levels, they will have a higher level of technical content.
Execution standards
In addition to meeting the requirements of the national standard GB 20052-2020 for product performance, this series of products also complies with the following national standards: GB/T1094.1, GB/T1094.2、JB/T10088 、GB/T1094.3、GB/T1094.5、GB/T25289、GB/T6451、GB/T7595、JB/T3887.
Note: All transformer products produced by our company meet the latest versions of the national standards mentioned above.
Use
Environmental conditions for use
Altitude: Not exceeding 1000m;
Ambient temperature: Maximum air temperature+40℃; Hottest monthly average temperature+30℃; Highest annual average temperature+20℃; Outdoor minimum temperature-25℃.
The waveform of the power supply voltage is approximately sinusoidal.
For a three-phase transformer, the three-phase power supply voltage should be roughly symmetrical.
Installation environment: There is no obvious contamination in the installation environment.
Ground acceleration for seismic events: Horizontal direction is less than 3m/s², vertical direction is less than 1.5m/s².
Special conditions of use: Any special conditions of use beyond the normal operating conditions of the transformer should be specified at the time of inquiry and ordering.
